PDA

View Full Version : Working / Diagnostic drawings



manofgresley
10-06-2013, 08:34 PM
Hi all

Having built my CNC control cabinet, what paperwork do i need to accompany it, ie Datasheets, Cable numbering list etc; is there a free download anywhere, or do you simply make up your own.

Regards

Ray

EddyCurrent
03-09-2013, 11:03 PM
Are you planning to sell it commercially ? if so you will require CE certification in which case you need a 'technical file'
CE marking - Technical file requirements (http://www.conformance.co.uk/info/technicalfile.php)

If it's just for your own use or you are selling it as a private individual then the following would be useful;

Product Data sheets
Schematic diagram
Wiring diagram (including wire numbers)
List of parameter settings (e.g. VFD settings)

manofgresley
04-09-2013, 01:57 PM
Hi
Many thanks for your reply.

I do not intend to sell, but if made the right offer i would consider it, as i could then build another and not make the same mistakes twice, i'm sure you understand me, i just thought they would be nice to help whoever i did sell it to, i would rather create them now, than try to remember everything some time down the road.

Regards

Ray

If it's just for your own use or you are selling it as a private individual then the following would be useful;

Product Data sheets
Schematic diagram
Wiring diagram (including wire numbers)
List of parameter settings (e.g. VFD settings)[/QUOTE]