View Full Version : 3.175mm router bits

ian stenson
12-06-2013, 10:24 PM
Hi guys

I'm after some help as new to cnc, I have a desktop CNC and looking to work with wood. My collet size is er11 and after V groove/carve bits with 3.175mm shank diameter. I cant seem to find any could any of you point me in the right direction please.

Many thanks


13-06-2013, 01:25 AM
Can't help with the 1/8" v bits Ian but if you are having problems finding them then it might be a good idea to buy an er11 collet set. That way you wouldn't be so limited in what shank size you can use.

blackburn mark
13-06-2013, 07:59 AM
do an ebay search for "3.175mm carbide engraving bit"

10 Carbide PCB Engraving Bits CNC Tool 45 Degree 0.2mm | eBay (http://www.ebay.co.uk/itm/10-Carbide-PCB-Engraving-Bits-CNC-Tool-45-Degree-0-2mm-/130408480381?pt=UK_Home_Power_Air_Tools&hash=item1e5cf37e7d)

buy in packs of ten and they should only cost one or two quid a piece (china)