PDA

View Full Version : RFQ: Brass tags



drumsticksplinter
23-06-2013, 06:05 PM
Hi Guys,

I've been asked by a friend of mine if I know of anyone who can make a few parts out of 3mm brass sheet.

9128
details blurred to protect identity.

The parts are as above and there are 3 to be made, 1 of which is engraved and a further 2 which are blank. The parts are just decorative and so I would image that the sharp edges could include a small radius say of 1.5 - 2mm to accommodate a cutter.

Could you please give us a rough price for these?

Thanks.

drumsticksplinter
23-06-2013, 06:10 PM
Sorry, can you make that 2mm thick?

Thanks

asbo
23-06-2013, 07:10 PM
I can see your full address and telephone number on the .png image. Might want to delete that one.

drumsticksplinter
23-06-2013, 07:17 PM
Thanks asbo, didn't realise that 1 had attached also, ooops!