PDA

View Full Version : SBR20 measurement



kingcreaky
17-07-2013, 10:25 AM
as a delivery from chai isnt expected now until Monday, im forced to trust the dimensions off sketchup.

chai's schematic gives me most of the dimensions but is somebody able to confirm the below measurement off a SBR20 rail is indeed 49mm?

9300

asbo
17-07-2013, 12:13 PM
They are on mine yes :smile:

jcb121
17-07-2013, 02:20 PM
I made those SBR block on sketchup and yes they are accurate to the dimensions given in the datasheet.

I think we should have a community sketchup thread with all bits and bobs of cnc machines. so people don't have to keep making the same parts over and over again.

Lee Roberts
17-07-2013, 06:42 PM
I made those SBR block on sketchup and yes they are accurate to the dimensions given in the datasheet.

I think we should have a community sketchup thread with all bits and bobs of cnc machines. so people don't have to keep making the same parts over and over again.

Just drop them in the Open Source (http://www.mycncuk.com/forums/forum.php#source) forum?

.Me