PDA

View Full Version : RFQ: come on at least have a look



nobby
25-07-2013, 12:44 AM
http://img.photobucket.com/albums/v222/pantswagen/mount3_zpsec38d87f.jpg

lower wide mounting points 150mm
centre hole 65mm
to take m6 socket caps
mill two from 1/2 inch thick alloy
how much please with post?

i can send you it dxf

nobby
25-07-2013, 12:13 PM
http://img.photobucket.com/albums/v222/pantswagen/IMG00777-20130725-1103_zps3a67b109.jpg
ok t slot is 150mm on centres
I have the slot tab nuts, they are m6 - the bolt length doesn't matter as I shalll cut them
the socket cap head is 10mm wide

the motor is really light weight
http://img.photobucket.com/albums/v222/pantswagen/mount4_zps2b3cf155.jpg
is this how you would like the dxf?

anyways, the other idea of the flat mount is a foolish idea, as it involves spot facing? or milling the mount down,
I would rather two thin ones as it will look tidier, be less heavyand hold the thing better, plus in the future if i buy a 65mm 1.5kw motor and vhf, I can simply fling it in..........................

i do not know how I can attatch a dxf to this thread, - is it possible?

Web Goblin
25-07-2013, 01:22 PM
Flat plate would still work as the original mount would have machined faces on the bottom.
Check your pm.

nobby
02-08-2013, 08:53 PM
this now taken care of thanks

nobby
08-08-2013, 06:32 PM
http://img.photobucket.com/albums/v222/pantswagen/ecea18e9-10ce-431e-bebe-66188b17fa1e_zpsde14af4e.jpg?t=1375979394
thanks

Web Goblin
09-08-2013, 07:04 AM
Looks nice :whistle:

nobby
09-08-2013, 12:30 PM
Looks nice :whistle:

no, they look frickin awesome, thanks for doing them!!!

Web Goblin
09-08-2013, 01:43 PM
Your very welcome. Im glad your happy with them.