PDA

View Full Version : FOR SALE: various milling tools



chopper12
26-07-2013, 08:39 PM
hi here is a list of some new carbide cutters that I have got for sale, if interested please message me and we can sort out a great price

manufacturer MATERIAL TOOL NO. PART NO. DESCRIPTION QUANTITY
M A FORD ALUMINUIM 13562900N3 135 16N3 16MM X 18. X 117MM 2
M A FORD ALUMINUIM 13547200N3 135 12N3 12MM X 14. X 76 1
M A FORD ALUMINUIM 13531500N3 135 08N3 8MM X 9.5 X 64MM 2
M A FORD ALUMINUIM 13531501N3 135 08N3-0.5R 8MM X 9.5 X 64MM 0.5 RAD 1
M A FORD ALUMINUIM 13531503N3 135 08N3-1.0R 8MM X 9.5 X 64MM 1.0 RAD 1
M A FORD ALUMINUIM 13523600N3 135 06N3 6MM X 7 X 64MM 2

M A FORD STEEL 17747201A 177 1200-0.50RA 12MM X 26 X 83MM 0.5 RAD 3
M A FORD STEEL 177S3937R020A 177S 10-0.50RA 10MM X 32 X 72MM 0.5 RAD 1
M A FORD STEEL 17731501A 177 0800-0.50RA 8MM X 19 X 63MM 0.5 RAD 1
M A FORD STEEL 179L2362N5A 179L 06N5A 6MM X 9 X 101MM BALLNOSE 2

OSG STEEL 404-236211 6MM HYP-EMS XCEED 1


EUROPA STEEL 134323 10MM BALLNOSE X 22 X 72MM



SUMITOMO STEEL WEX 2016E WEX 16MM TIP TOOL BODY 1
SUMITOMO STEEL WEX 2020E WEX 20MM TIP TOOL BODY 1
SUMITOMO STEEL AXMT123504PEER-G WEX TOOL TIPS (ACP300) 200

thanks for looking

chopper12
30-07-2013, 10:56 PM
anyone? need these gone

Mad Professor
31-07-2013, 10:11 AM
It might be an idea to list price(s).

chopper12
31-07-2013, 09:51 PM
HI ALL THESE ITEMS ARE BRAND NEW
M A FORD IS ONE OF THE BEST MANUFACTURES OF CARBIDE TOOLING, VERY DURERABLE AND LONG LASTING AND GREAT FINISHES

manufacturer MATERIAL TOOL NO. PART NO. DESCRIPTION QUANTITY RRP each around each
M A FORD ALUM 13562900N3 135 16N3 16MM X 18. X 117MM 2 138.00 80.00
M A FORD ALUM 13547200N3 135 12N3 12MM X 14. X 76 1 70.00 40.00
M A FORD ALUM 13531500N3 135 08N3 8MM X 9.5 X 64MM 2 34.37 20.00
M A FORD ALUM 13531501N3 135 08N3-0.5R 8MM X 9.5 X 64MM 0.5R 1 34.37 20.00
M A FORD ALUM 13531503N3 135 08N3-1.0R 8MM X 9.5 X 64MM 1.0R 1 34.37 20.00
M A FORD ALUM 13523600N3 135 06N3 6MM X 7 X 64MM 2 29.09 12.50

M A FORD STEEL 17747201A 177 1200-0.50RA 12MM X 26 X 83MM 0.5R 3 50.67 30.00
M A FORD STEEL 177S3937R020A 177S 10-0.50RA 10MM X 32 X 72MM 0.5R 1 46.30 25.00
M A FORD STEEL 17731501A 177 0800-0.50RA 8MM X 19 X 63MM 0.5R 1 33.07 20.00
M A FORD STEEL 179L2362N5A 179L 06N5A 6MM X 9 X 101MM BALLNOSE 2 40.58 25.00

OSG STEEL 404-236211 6MM HYP-EMS XCEED 6MM X 15MM 1 25.00 10.00


EUROPA STEEL 134323 10MM BALLNOSE X 22 X 72MM 1 43.10 25.00



SUMITOMO STEEL WEX 2016E WEX 16MM TIP TOOL BODY 1 169.53 ---\
SUMITOMO STEEL WEX 2020E WEX 20MM TIP TOOL BODY 1 185.93 -------- 450 for these 3
SUMITOMO STEEL AXMT123504PEER-G WEX TOOL TIPS (ACP300) 200 900.00 ---/ together


THESE ARE ROUGH PRICES STILL OPEN TO ALL OFFERS FOR INDIVIDUAL, MULTIPLE OR EVERYTHING
NEED TO GET THESE GONE THANKS

chopper12
11-08-2013, 03:50 PM
300 the lot inc delivery
there's over 1800 worth of carbide tools

chopper12
17-08-2013, 05:49 PM
145 the lot inc delivery
or will be going for carbide scrap which would be ashame as all are brand new

CURLY109
05-11-2013, 08:56 AM
Hi

Have you sold or scrapped the cutters yet?

chopper
03-12-2013, 08:10 PM
hi, yes still got them, sorry about the late reply

audioandy
03-12-2013, 09:54 PM
Hi Chopper

I will take these for 145 posted send me payment details.

Better still I will be coming down to the Sywell shooting ground on Sunday which is in Northampton if you are close we could meet and pay you cash.

Regards

Andy

chopper
03-12-2013, 10:29 PM
item removed

CURLY109
03-12-2013, 10:37 PM
Hi Chopper

I have sent you a private message

chopper
03-12-2013, 10:53 PM
hi, I have not had a pm yet, if you would like to resend
thanks

JAZZCNC
04-12-2013, 12:31 AM
hi i'm sorry but not too desperate to sell these at the moment and due to my cost ideally want around 300 for the lot

. . . Pirate.!!

chopper
04-12-2013, 12:48 AM
. . . Pirate.!!
Whats that supposed to mean???????
That price was open when I was desperate 3 months ago
The thread was recently brought back to life

JAZZCNC
04-12-2013, 01:02 AM
Whats that supposed to mean???????
That price was open when I was desperate 3 months ago
The thread was recently brought back to life

Your taking the Piss mate.!! . . . It's not on offering something up at a Price which you where going to Scrap if didn't get any offers only then to suddenly double the price when you have a genuine offer.!! . . . . That's a Piracy in my book !

John S
04-12-2013, 01:45 AM
hi i'm sorry but not too desperate to sell these at the moment and due to my cost ideally want around 300 for the lot


Then WTF did you quote 145 for these delivered in post #6 ?


[quote] 145 the lot inc delivery
or will be going for carbide scrap which would be a shame as all are brand new [/quote ]

irving2008
04-12-2013, 07:36 AM
Putting the moral indignation aside for the moment what someone wants to sell for is their decision. You could say it was a limited time offer, priced to sell and it didn't.

Obviously in August chopper needed the cash or the stuff moved urgently but by November he didn't. We don't know the circumstances, people sometimes do things they later regret when desperate. I nearly sold my whole workshop for 2k after my accident, it's worth considerably more. Fortunately I came to my senses in time.

It might have been better to have said something in his reply to curly but he didn't. That said, it's true that chopper has probably shot himself in the foot and he's unlikely to sell them here now. All you lot are upset about is the loss of a quick profit!

CURLY109
04-12-2013, 09:27 AM
Can I just point out that Chopper made his decision to not go for the 145 price before he contacted me and I have not bought the tools from him.
And to be fair to him until I contacted him a few weeks ago nobody has been interested in buying them for the past 5 months.

johnsattuk
04-12-2013, 10:19 AM
I also sent him a PM a few weeks ago offering the 145 he was asking at the time

chopper
05-12-2013, 11:37 PM
all prices/offers are no longer open and items are no longer available through here

johnsattuk
06-12-2013, 07:32 PM
all prices/offers are no longer open and items are no longer available through here

Were they ever :grumpy: