PDA

View Full Version : BUILD LOG: Jcb's CNC machine Mark 2.



jcb121
29-08-2013, 11:37 AM
So I finished my MK1 machine last year, with help from I2I, Jazzcnc and 20ep0z (if that's right!)

http://farm6.staticflickr.com/5484/9566550986_c37ce95377.jpg (http://www.flickr.com/photos/97681856@N05/9566550986/)
DSC_0070 (http://www.flickr.com/photos/97681856@N05/9566550986/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr

and I feel it's time to go bigger and better.
4 times bigger!

I've already got all my ball screws and bearings:
http://farm3.staticflickr.com/2811/9618871829_97660dbf6a.jpg (http://www.flickr.com/photos/97681856@N05/9618871829/)
20130812_122840 (http://www.flickr.com/photos/97681856@N05/9618871829/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr

With thanks to fred from BST Automation on Aliexpress.

those are 5mm pitched screws on the X and Y. I know some people on here will say that I should of gone for 10mm pitch but the speed of the machine doesn't bother me in the slightest and I can always gear it faster.

So it's payday tomorrow so I'll be buying some aluminium in hopes to make this:
http://farm6.staticflickr.com/5537/9618863431_e2a573e9a1.jpg (http://www.flickr.com/photos/97681856@N05/9618863431/)
v2 (http://www.flickr.com/photos/97681856@N05/9618863431/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr

the Y rails sit on 6" x 1" alu bar and will have some square section bolted onto it to hold the rails and reinforce the gantry.

http://farm8.staticflickr.com/7444/9618894149_ecc37f868f.jpg (http://www.flickr.com/photos/97681856@N05/9618894149/)
v23 (http://www.flickr.com/photos/97681856@N05/9618894149/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr

the X rails will sit on 3"x2" box section alu or more likely steel.

as well as having a CNC to help make this, I'm going to be buying a height gauge and a surface plate to help make it accurate. I remeber seeing 20ep0z use one to help me finish my gantry so I think it's a worthwhile investment. though I'll have to get a granite one.


what do you think chaps?

EddyCurrent
29-08-2013, 12:38 PM
You might get a granite plate at Tilgear for reasonable money.
Your design makes for a very rigid gantry and it highlights something I've been thinking about. Say you wanted a height under the gantry of 200mm then with your design you would raise the Y assembly from the bed by about 200mm but then how do you make the 200mm risers stiff ? probably by using a welded steel frame ?

Edit: I should have checked out more of the build logs first, there's quite a few along the same principle :chargrined:

jcb121
29-08-2013, 06:27 PM
after looking at designs that have been posted on here rather recently, I think I'm going to place the supported rail next the ball screw on the X axis.

this will allow me to align is easier and level it using the epoxy method, it will allow me to keep things very flat very easily.

I can then bolt that assembly to a steel frame and have it nice and strong.

jcb121
02-09-2013, 06:48 PM
So slight update,

I've ordered nearly all the alu parts at Metal goods Bridgend.

and will be picking it up Wednesday.

today I took delivery of these, as well as some lathe tools

http://farm4.staticflickr.com/3742/9657465738_37c96888af.jpg (http://www.flickr.com/photos/97681856@N05/9657465738/)

so my hopes is to get it nearly all built this month and then plop it onto an steel frame and get all the electronics next month.

exciting times!

i2i
02-09-2013, 11:16 PM
Jesse I could have lent you a surface plate. Are you ok for transport Wednesday.

jcb121
03-09-2013, 12:45 AM
Hey I2I, I did presume you had one and i did think about messaging you, but it's always nice to own things :)

I'm fine for transport on Wednesday, thanks, my dad and I are going to pick up the aluminium and then go watch Elysium.
though I'll probably have my mind on scribing, drilling and tapping instead of enjoying the film.

hopefully my current machine will be up to the challenge of making the more specialized bits.

i2i
03-09-2013, 01:27 AM
sounds good, i'm interested in a demo of the quadcopter when it's sorted.

WandrinAndy
03-09-2013, 04:31 AM
So I finished my MK1 machine last year, with help from I2I, Jazzcnc and 20ep0z (if that's right!)



http://farm6.staticflickr.com/5484/9566550986_c37ce95377.jpg (http://www.flickr.com/photos/97681856@N05/9566550986/)


DSC_0070 (http://www.flickr.com/photos/97681856@N05/9566550986/) by

jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr



Jesse, I have just had a browse through your many interesting and informative pics on FLICKR and have found them great for helping my novice thoughts, so many thanks for that.

Good luck with the new build.

Andy

jcb121
03-09-2013, 09:26 PM
Thanks andy, I don't normally share my projects as most of the time I know what I'm doing and maintaining a thread is hard work.
I want to keep the thread informative but not too boasty or have it read like a user manual.

But flickr makes It painless enough.

But there are a few skills and techniques I did not know anything about at all when I started building my last machine like using a flat and a height gauge. It wasn't until I saw swarfing use one did I realise what a good skill/bit of kit it is. So I'll have to make a post and photograph that for me from the past and others.

jcb121
04-09-2013, 03:04 PM
Just picked up my alloy and damn it's heavy! :)

jcb121
05-09-2013, 12:33 PM
I've made some slight progress, why do I have to go to work today :(

Jonathan
06-09-2013, 02:17 PM
Are you just fixing the sawn surfaces together or machining them first? I'd be concerned about fixing sawn edges together...

jcb121
06-09-2013, 05:13 PM
no I'm not milling them and I'll probably face the repercussions of it in the way of needing more adjust-ability. I could do it on my current cnc machine, but it'll probably just be more of a pain as I don't know how square the machine is. I just popped it together as the stuff I do on it isn't that accurate.

I've got some proper photos this time:
http://farm8.staticflickr.com/7431/9688249308_3fae861d38.jpg (http://www.flickr.com/photos/97681856@N05/9688249308/)
DSC_0180 (http://www.flickr.com/photos/97681856@N05/9688249308/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr
http://farm6.staticflickr.com/5458/9685011371_bcf8edbb14.jpg (http://www.flickr.com/photos/97681856@N05/9685011371/)
DSC_0181 (http://www.flickr.com/photos/97681856@N05/9685011371/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr
http://farm4.staticflickr.com/3761/9685011113_d217f1fdb6.jpg (http://www.flickr.com/photos/97681856@N05/9685011113/)
DSC_0182 (http://www.flickr.com/photos/97681856@N05/9685011113/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr

with more support block just placed in:
http://farm8.staticflickr.com/7291/9685010645_4c44ab220b.jpg (http://www.flickr.com/photos/97681856@N05/9685010645/)
DSC_0184 (http://www.flickr.com/photos/97681856@N05/9685010645/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr

where the ball screw will sit:
http://farm4.staticflickr.com/3683/9688247842_3efe4c2b81.jpg (http://www.flickr.com/photos/97681856@N05/9688247842/)
DSC_0186 (http://www.flickr.com/photos/97681856@N05/9688247842/) by jessebaker (http://www.flickr.com/people/97681856@N05/), on Flickr

so far so good. I'm loving the height gauge and I've been making all the holes line up perfectly, no drilling a bigger hole then needed.

I do have a problem drill into the end of the ganrty plate. at 1100mm long it's a bit tricky to put it in my tiny drill press. and my cordless is a bit kak.

might have to take it to my old school.

jcb121
20-09-2013, 12:39 AM
I've got a few more pictures on my Flickr, it's tricky to grab the url on my phone. I'll update this properly tomorrow.