PDA

View Full Version : WANTED: FOUND: RM1605 ballscrew, at least 365mm (ish)



Jonathan
03-09-2013, 06:29 PM
As pert the title, I'm after a length of RM1605 ballscrew that's at least 365mm long. I may be able to get away with slightly less, depending on what end machining it has. Longer is fine as I'm happy to cut it and machine the ends. Ballnut optional...

I'll pay approximately what it costs for a new one from China.

JAZZCNC
03-09-2013, 08:29 PM
I've got 500mm Total length No nut thou. Standard end machining it's yours just arrange for collection.
Also got 250mm length same.

Gytis
03-09-2013, 08:41 PM
Hi Jonathan,

I have Rm1605 screw with nut, full length is 980mm (end machined)
as I stated in my built log the screw has a little bent in the middle (approx 3-4 mm).
Would you like swaps?, I need PSU (I will pay difference)
let me know if you are interested.

Jonathan
03-09-2013, 09:49 PM
Thanks for the offers, just thinking/measuring then I'll get back to you...

wangxiaorui
08-09-2013, 03:01 AM
As pert the title, I'm after a length of RM1605 ballscrew that's at least 365mm long. I may be able to get away with slightly less, depending on what end machining it has. Longer is fine as I'm happy to cut it and machine the ends. Ballnut optional...

I'll pay approximately what it costs for a new one from China.

Hi,Jonathan,

Can you send us picture and drawing of Ballscrew you are looking for?

So let us check.Thanks!

Linda