PDA

View Full Version : denford orac tail stock dimensions



deisel
24-11-2013, 07:35 PM
can anyone with a denford orac tell me what the measurement is from bed to center of the bore on an orac tail stock>thanks

i2i
24-11-2013, 09:59 PM
it will be the same as your chuck center.

deisel
24-11-2013, 10:24 PM
i dont own an orac but the slide ways an saddle look almost identical to a lathe i have thats minus its tail stock,

i2i
24-11-2013, 10:42 PM
around 105mm