View Full Version : Long Down Cut Spiral End Mills
22-12-2013, 05:36 PM
Does anyone know where I can buy a 6mm or 1/4" shank, down cut spiral 2 flute end mill with a cut length somewhere between 35mm and 50mm?
23-12-2013, 01:46 PM
1/4" Carbide Router Bit 2 Flute Spiral Downcut | eBay (http://www.ebay.es/itm/1-4-Carbide-Router-Bit-2-Flute-Spiral-Downcut-/141013293504?pt=LH_DefaultDomain_2&hash=item20d50c19c0&_uhb=1)
its 1 1/4 LOC /length of cut/, it will work for you, except if you plan to fine finish at one pass thicker material than the LOC , which with such long length will be difficult/ to find/
1/4" (.250") CARBIDE 3 FLUTE BIT FOR WOOD OR PLASTIC, CARVEWRIGHT, COMPUCARVE | eBay (http://www.ebay.es/itm/1-4-250-CARBIDE-3-FLUTE-BIT-FOR-WOOD-OR-PLASTIC-CARVEWRIGHT-COMPUCARVE-/151158084308?pt=Routers_Bits&hash=item2331b952d4)
1/4" 3 FLUTE CARBIDE ENDMILLS - 0 HELIX FOR PLASTIC and WOOD - Kyocera Microtool | eBay (http://www.ebay.es/itm/1-4-3-FLUTE-CARBIDE-ENDMILLS-0-HELIX-FOR-PLASTIC-and-WOOD-Kyocera-Microtool-/150700103986?pt=LH_DefaultDomain_0&hash=item23166d1932)
i use and guarantee that are topnotch, no down cut but ask him if he has downcut. Otherwise both will reach
23-12-2013, 05:11 PM
1300 Series. Two Flute Downcut Finishing Spiral - Wood (http://www.cutter-shop.com/wood/1200-series-2.html)
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.