PDA

View Full Version : RFQ: Small sized Parts need making, small batches



Ptee
16-01-2014, 12:04 AM
Hi

new on here, and stumbled across this forum after struggling to find someone to create my parts in after

Here's a picture of a sketch I drew with some
measurements on, I know it's not much but hopefully someone can give me an idea of cost and if they are interested in doing it!

i am after 2 off (these are handed, so one of each side)
25mm thick (max)
he15 material
http://i164.photobucket.com/albums/u28/phill172/Mobile%20Uploads/image_zpsc1f270d4.jpg (http://s164.photobucket.com/user/phill172/media/Mobile%20Uploads/image_zpsc1f270d4.jpg.html)

anyone interested please pm me, and if pricing is right no one is too far away!
i have various other parts that I need making plus some larger items to be either laser or water cut
from s275 25mm

many thanks

Web Goblin
16-01-2014, 06:10 AM
Any chance you can post a dxf or dwg file of the parts you need?

Ptee
16-01-2014, 07:44 AM
Any chance you can post a dxf or dwg file of the parts you need?


Yes ill try a dwg, should be up later today
thanks

Ptee
17-01-2014, 05:07 PM
If you pm me, I can then email the dwg across!