briand
29-01-2014, 08:04 PM
Hello All, my name is Brian and I live in the south of the UK.
I have a modified Axminster SIEG Super X1 Micro-Mill which has been upgraded with a CNC drive system and ball screws which is driven by Mach 3 which I have used for making many things including a carbon fibre RC motorbike Brian Dorey.com | RC Bike Project (http://briandorey.com/post/RC-Bike-Project.aspx) to a DIY pick and place machine which is an ongoing project with the build progress on my blog at Brian Dorey.com | DIY Pick and Place (http://briandorey.com/category/DIY-Pick-and-Place.aspx)
My workshop is in the loft of my home and is very limited on space as you can see from the panoramic picture of the workshop on Apexweb - Loft (http://www.apexviews.co.uk/tour/113)
I have a modified Axminster SIEG Super X1 Micro-Mill which has been upgraded with a CNC drive system and ball screws which is driven by Mach 3 which I have used for making many things including a carbon fibre RC motorbike Brian Dorey.com | RC Bike Project (http://briandorey.com/post/RC-Bike-Project.aspx) to a DIY pick and place machine which is an ongoing project with the build progress on my blog at Brian Dorey.com | DIY Pick and Place (http://briandorey.com/category/DIY-Pick-and-Place.aspx)
My workshop is in the loft of my home and is very limited on space as you can see from the panoramic picture of the workshop on Apexweb - Loft (http://www.apexviews.co.uk/tour/113)