Various Steppers, servos, drives for sale

[Peter.]

Afternoon,

I have the following items I have collected with a view to building a CNC project which I would like to dispose of.

2No Berger Lahr VRDM3910/50LVBOO - tested working
2No Berger Lahr WD3-004.0801 - tested working
2No Berger Lahr SER397/4L3SS0TO - untested
2No Mitsubishi MR-J2S-40A - untested
2No HC-MFS43 - untested

Plus a bunch of related cabling. I would like £500 firm for all of this, as a job lot. I am in N Kent but could deliver it to N Kent, S Essex or East/central London within reason, or you could collect.

Thanks for looking,

Pete.

[JAZZCNC]

If you guarantee me they all work then I'm interested at the money you want but not if any are untested.

[Peter.]

Hi Jazzcnc.

All of this stuff has been pulled from working machines and well-handled, though it wasn't me that pulled them.

The top two pairs I have powered and controlled with mach3, through a range of steps up to the max of 10k steps/rev.
The middle motors I have no way (or knowledge of how) to test, no canbus controller.
The bottom two pairs are matched together drive/servo units so I could power them for testing but I might need my hand held as to how.

Pete.