PDA

View Full Version : VFD problems, please help. error code DL



humbo3d
06-02-2014, 05:42 PM
Hi
When i press start on my vfd the spindle starts to spin for a second or so them stops with an error code = DL.

can't find out where the problem is, it has been working fine for months.

Any ideas would be great

Thanks Tony
P.S it's a 1.5kw with 800w spindle.

magicniner
08-02-2014, 11:59 PM
The error code doesn't appear to match anything from my Siemens, Mitsubishi, Omron or ABB drive manuals,

- Nick

EddyCurrent
09-02-2014, 08:10 PM
Read this Help Please: Huanyang VFD + 1.5Kw Water cooled spindle [Archive] - Woodwork Forums (http://www.woodworkforums.com/archive/index.php/t-173689.html) then check the wiring to your spindle motor, especially the plug. With a resistance meter it should read the same between all three wires U-V, V-W, W-U.