View Full Version : T-slot clamping accessories

16-02-2014, 01:54 PM
Don't know what other people use for clamping on router tables but I fitted my machine with some 3/4" extruded aluminium T-slots. I bought a couple of T-nuts and clamping knobs to go with them, so I could get dimensions for making more of my own. Then I found this (http://www.axminster.co.uk/axminster-148-piece-jig-making-set) on special offer at the moment. Not sure how long the deal lasts but at that price, I'm not going to bother making them. I've just made a few shaped aluminium sliders to go in the slots pocketed underneath to take the heads of the T bolts in the kit (intended for 1/2" T-slots). Only thing to watch is that these are 1/4BSW. Must be the last thing on earth being made with that thread!
I'm nothing to do with Axminster other than being on their mailing list - just thought someone else might find this useful.

Lee Roberts
16-02-2014, 02:44 PM
Nice one Neale, I better get an order in quick because there is no way i would pay that normal price of 36.


KB Aluminium
16-02-2014, 06:48 PM
Hi Neale,

I know know if I have it right in my head what your trying to describe but thought I would drop a link in here for you...

Connecting strip 180 (http://www.motedis.co.uk/shop/Slot-profiles-accessories/Accessoiries-30-B-Type-slot-8/Connecting-strip-180-with-accs-b-Type-slot-8::99999339.html)

These are usually for connecting profiles but would make a good base for attaching clamps to a T Slot bed.

Hope it helps.