PDA

View Full Version : V bit carving



Mikeb
19-02-2014, 12:32 PM
Hi can anyone help me I am new to all this and I am looking to find where it can purchase bits for v bit carving to fill an ER11 collet can anyone provide me with a link to a uk store. And also if anyone has any images of what they look like would be appriciated as not sure what they look like Thanks

EddyCurrent
19-02-2014, 09:16 PM
1/4" is the largest size your collet will take.

http://stores.ebay.co.uk/SUPERWORKSHOP-BITBITWORLD/V-Shape-Engraving-Bits-/_i.html?_fsub=1458721012&_sid=942192292&_trksid=p4634.c0.m322
Wealden Tool Company Limited V Grooving (http://www.wealdentool.com/acatalog/V_Grooving_44.html)
http://www.trend-uk.com/en/UK/productlist/3/115/chamfer_and_v_groove.html
Router Bits - Routers & Trimmers - Power Tools | Axminster.co.uk (http://www.axminster.co.uk/power-tools/routers-trimmers/router-bits#%2Fpower-tools%2Frouters-trimmers%2Frouter-bits%3Fp%3D3)

There's lots more places if you just search.

martin54
19-02-2014, 09:34 PM
Wealden Tools are pretty good, bought a few bits from them, prices are ok & delivery is good.

magicniner
20-02-2014, 12:30 PM
I was recommended Nine9 inserted engraving tools when I was getting through a lot of V bit cutters.
I bought one and I'm now waiting for another suitable job to come in to evaluate tooling performance.
It certainly looks the part ;-)

Neale
20-02-2014, 04:52 PM
I have used cncroutershop. Might not be the cheapest but they have a reasonable range of cutters and quick service.