PDA

View Full Version : WANTED: BK12 Bearing Block Wanted - 1 off



EddyCurrent
02-03-2014, 12:12 PM
I ordered the right amount from Chai but used a BK12 bearing on my Z axis instead of the intended FF type I ordered so now I'm a BK12 short. Just need the one with nut.

EddyCurrent
03-03-2014, 10:01 PM
Not having much luck with this one ?

JAZZCNC
03-03-2014, 10:36 PM
Not having much luck with this one ?

I'll have a look and see what i've got. I may have the block but not the nut.?

Jonathan
03-03-2014, 11:23 PM
Read your post yesterday and ignored it as I don't use these... but just remembered that I do have one which I fully intend on never using. Not sure if I pilfered the bearings from it or not. Assuming it's complete you can have it for whatever the bearings cost, as that's the only bit which is useful to me.

I can easily post it on Saturday, when I go home, or ask my Mum to post it but that might be a bit risky!

EddyCurrent
03-03-2014, 11:33 PM
Thanks Jonathan, I would only want it if complete, let's see what Dean or someone else comes up with and I'll know what's what before the weekend.

Lee Roberts
03-03-2014, 11:45 PM
You've got a pm Eddy. .Me

EddyCurrent
04-03-2014, 12:24 AM
Thanks Dean and Jonathan but Lee has come up with a most excellent solution.

Steel
11-03-2017, 08:52 PM
After finding 2x 6001 bearings in my BF12 block it may pay to check what you have in your block.