D2C
02-03-2014, 05:22 PM
11733
Hello I am selling our Seig KX1 milling machine, it's approximately two years old and has been used in the main for engraving brass and aluminium along with machining small parts in aluminium and engineering plastics. It is an excellent machine and we have now moved onto a slightly bigger machine and the space is needed so this little machine needs to go. The KX1 is in excellent condition and will come complete with a MT2 collet chuck and set of collets. You will need a Mach 3 license and compatible PC to operate this machine. Please contact me for further details.
£1500.00 ono.
Specification:
End Milling Capacity
10mm
Face Milling Capacity
20mm
Drilling Capacity
10mm
Effective Table Size
400x145mm
Lubrication
Press Button Oilers
Table Travel - X-Axis
260mm
Table Travel - Y-Axis
115mm
Head Travel - Z-Axis
185mm
Head-Table Distance
70-255mm
Ballscrew Size (Dia. x Pitch)
12mm x 4mm
X-Axis Motor
1.35Nm
Y-Axis Motor
1.35Nm
Z-Axis Motor
2.2Nm
Throat
140mm
No. of T-Slots (Size)
3 (8mm)
Positional Accuracy
0.01mm
Spindle Taper
MT2
Spindle Motor
500w Brushless DC Motor
Spindle Speed
250-7000rpm
Max. Spindle Motor Torque
1.8Nm @ 1500rpm
Power Requirements
230v AC 50Hz
Overall Dimensions (w/d/h)
630x630x630mm
Max. Space Required (w/d/h)
910x630x730mm
Shipping Dimensions
76x76x79cms
Weight (Net/Gross)
86/120kg
***PLEASE NOTE THAT THIS IS NOW SOLD, THANK YOU***
Hello I am selling our Seig KX1 milling machine, it's approximately two years old and has been used in the main for engraving brass and aluminium along with machining small parts in aluminium and engineering plastics. It is an excellent machine and we have now moved onto a slightly bigger machine and the space is needed so this little machine needs to go. The KX1 is in excellent condition and will come complete with a MT2 collet chuck and set of collets. You will need a Mach 3 license and compatible PC to operate this machine. Please contact me for further details.
£1500.00 ono.
Specification:
End Milling Capacity
10mm
Face Milling Capacity
20mm
Drilling Capacity
10mm
Effective Table Size
400x145mm
Lubrication
Press Button Oilers
Table Travel - X-Axis
260mm
Table Travel - Y-Axis
115mm
Head Travel - Z-Axis
185mm
Head-Table Distance
70-255mm
Ballscrew Size (Dia. x Pitch)
12mm x 4mm
X-Axis Motor
1.35Nm
Y-Axis Motor
1.35Nm
Z-Axis Motor
2.2Nm
Throat
140mm
No. of T-Slots (Size)
3 (8mm)
Positional Accuracy
0.01mm
Spindle Taper
MT2
Spindle Motor
500w Brushless DC Motor
Spindle Speed
250-7000rpm
Max. Spindle Motor Torque
1.8Nm @ 1500rpm
Power Requirements
230v AC 50Hz
Overall Dimensions (w/d/h)
630x630x630mm
Max. Space Required (w/d/h)
910x630x730mm
Shipping Dimensions
76x76x79cms
Weight (Net/Gross)
86/120kg
***PLEASE NOTE THAT THIS IS NOW SOLD, THANK YOU***