View Full Version : Hole Radius

03-03-2014, 04:29 PM
Hi Guys

Got a job on The VMC which requires me to mill a 35mm radius on to a 24.2mmhole and I don't have the 3d capabilities on my cad/cam have been talking to acouple of guys and they have said to try Co-ordinate rotation (G68) steppinground the hole in 0.5mm increments and then using G18 and G03 tointerpolate the radius on but as the hole has a dia of 36.1 at the top of theradius and the fact that I would have to travel 362 degrees just to blendthe finish this would take a hell of a long time just wondered if anyone hasany better way of doing this task


(using a Fanuc oi-MD controlled leadwell V30I)