View Full Version : Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver

16-03-2014, 04:33 PM
Dear all, I have done a number of CNC projects and have always used a ArcEuro`s 4.2A Bi-Polar Stepper Motor Driver. My latest project may not even work and I`m concerned with spending so much on the drivers! When I first purchased drivers from Arc many years ago, the stepper drivers were selling for 38 but they have now nearly doubled in price:
Stepper Drivers - Arc Euro Trade (http://www.arceurotrade.co.uk/Catalogue/Stepper-Motors/Stepper-Drivers)

In all honesty, up to a 3A driver would be enough - in fact, I don`t think I have any motors in my spares draw above 2.x amp. I remember last time I used a driver, another hobbyist commented on how cheaply identical drivers can be purchased from china on ebay! I have looked but there are lots of choices. I certainly would like something a little more reliable than the TB6560 unless these have improved over the last few years. Can anyone recommend a reasonable stepper driver similar to those sold by Arc? I`m not in a rush so ordering off ebay or china is fine if the price is right.

16-03-2014, 07:29 PM
Pick one (http://www.ebay.co.uk/sch/Electrical-Test-Equipment-/92074/i.html?_from=R40&_sop=15&_nkw=m542&LH_PrefLoc=2&_arm=1&_armm=63&_ruu=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2FElectrica l-Test-Equipment-%2F92074%2Fi.html%3F_from%3DR40%26_sop%3D15%26_nkw %3Dm542%26_arr%3D1)...