m_c
25-03-2014, 12:51 AM
Since my new lathe is now fully functioning, I need to sell my Conect 121 Lathe.
Quick spec list-
Based on a Myford ML10 (Speed 10 version with taper roller bearing spindle)
USB SmoothStepper
CNC4PC C23 rev2.1 BOB
Gecko G251 stepper motor drivers running the original stepper motors
3/4hp DC Spindle motor controlled by a KBIC-240D (fully controlled via Mach)
Mist cooling system (I've never used it, but it's all there and working from Mach)
Z-axis travel - 205mm aprox.
X-axis travel - 85mm aprox.
Overall dimensions- 121cm wide x 63cm deep x 49cm high
I'm also willing to include the current tooling-
3 Jaw 5" Pratt Burnerd chuck (same as originally supplied with the ML10)
ER32 Collet chuck with back plate
ArcEuro Model 200 QCTP
RH toolholder for CCMT0602 inserts (SCLCR) with QC holder
8mm Boring Bar for CCMT0602 inserts (S08 SCLCR) with QC holder
3 gang toolholder with 3 ER20 inserts with QC holder
2mm MDT (grooving/profiling/parting) for WDN inserts with QC holder
No computer is included, however I will supply the xml and tooltable files for Mach.
Build thread can be found at http://www.mycncuk.com/forums/mills-routers-lathes-commercial-machines/2619-conect-121-lathe-toy-collection-grows-4.html
(http://www.mycncuk.com/forums/mills-routers-lathes-commercial-machines/2619-conect-121-lathe-toy-collection-grows-4.html)Build photos/videos can be found at CNC Lathe - a set on Flickr (http://www.flickr.com/photos/mc_mtb/sets/72157625154378941/)
https://farm6.staticflickr.com/5560/13435998333_444bdb8b6c_z.jpg (https://www.flickr.com/photos/mc_mtb/13435998333/)
IMAG0473 (https://www.flickr.com/photos/mc_mtb/13435998333/) by mc_mtb (https://www.flickr.com/people/mc_mtb/), on Flickr
https://farm3.staticflickr.com/2865/13435981993_bf81e5ab35_z.jpg (https://www.flickr.com/photos/mc_mtb/13435981993/)
IMAG0477 (https://www.flickr.com/photos/mc_mtb/13435981993/) by mc_mtb (https://www.flickr.com/people/mc_mtb/), on Flickr
Now Sold.
Quick spec list-
Based on a Myford ML10 (Speed 10 version with taper roller bearing spindle)
USB SmoothStepper
CNC4PC C23 rev2.1 BOB
Gecko G251 stepper motor drivers running the original stepper motors
3/4hp DC Spindle motor controlled by a KBIC-240D (fully controlled via Mach)
Mist cooling system (I've never used it, but it's all there and working from Mach)
Z-axis travel - 205mm aprox.
X-axis travel - 85mm aprox.
Overall dimensions- 121cm wide x 63cm deep x 49cm high
I'm also willing to include the current tooling-
3 Jaw 5" Pratt Burnerd chuck (same as originally supplied with the ML10)
ER32 Collet chuck with back plate
ArcEuro Model 200 QCTP
RH toolholder for CCMT0602 inserts (SCLCR) with QC holder
8mm Boring Bar for CCMT0602 inserts (S08 SCLCR) with QC holder
3 gang toolholder with 3 ER20 inserts with QC holder
2mm MDT (grooving/profiling/parting) for WDN inserts with QC holder
No computer is included, however I will supply the xml and tooltable files for Mach.
Build thread can be found at http://www.mycncuk.com/forums/mills-routers-lathes-commercial-machines/2619-conect-121-lathe-toy-collection-grows-4.html
(http://www.mycncuk.com/forums/mills-routers-lathes-commercial-machines/2619-conect-121-lathe-toy-collection-grows-4.html)Build photos/videos can be found at CNC Lathe - a set on Flickr (http://www.flickr.com/photos/mc_mtb/sets/72157625154378941/)
https://farm6.staticflickr.com/5560/13435998333_444bdb8b6c_z.jpg (https://www.flickr.com/photos/mc_mtb/13435998333/)
IMAG0473 (https://www.flickr.com/photos/mc_mtb/13435998333/) by mc_mtb (https://www.flickr.com/people/mc_mtb/), on Flickr
https://farm3.staticflickr.com/2865/13435981993_bf81e5ab35_z.jpg (https://www.flickr.com/photos/mc_mtb/13435981993/)
IMAG0477 (https://www.flickr.com/photos/mc_mtb/13435981993/) by mc_mtb (https://www.flickr.com/people/mc_mtb/), on Flickr
Now Sold.