View Full Version : Oil BP : CS 68 Reservoir Shell : Vitrea 68 capacity Castrol : Perfecto NN

08-05-2014, 01:58 PM

I am after one of the following oils for my machine as they are recommended in the manual. Does anyone know where I can buy a liter or five liters of any of them? I have looked high and low and had a ring round but with no success.
BP : CS 68 Reservoir
Shell : Vitrea 68 capacity
Castrol : Perfecto NN

If anyone can point me in the right direction of one of the oils that would be real handy. I guess if not I will go an equivalent.

Many thank


08-05-2014, 06:00 PM
All those oils have been superceded/discontinued.

Is this for your mill?
If it is, get some 68 weight slideway oil. There's plenty choice, so just pick whatever you happen to be able to get at a quantity/price that suits you.
Personally, I'm currently using Shell Tonna M3, as it's pretty high spec and I found it at a good price.

08-05-2014, 10:15 PM
Hi m_c
Thanks for your post the oils superceded/discontinued then thats why I could not find them!
Yes it is fro my mill and I better gets some quick as it is nearing the low level. I will see if I can find the Shell Tonna M3 as you asy it is good spec. Failing that perhaps I may try this one on ebay or a Rock Oil one.
Delaway Slideway Oil 68 | eBay (http://www.ebay.co.uk/itm/171314524486?_trksid=p2055119.m1438.l2649&var=470381160095&ssPageName=STRK%3AMEBIDX%3AIT)

Many thanks for your help it has put me in the picture and I now know what is good

All the best