View Full Version : DIN rail and fittings suppliers
16-05-2014, 11:58 AM
It's not an area I'm familiar with - I do electronics more than electrical - but I see lots of people using DIN rail and associated fittings, and that gives a very neat and professional-looking result. Having just bought my first DIN-compatible component (Pilz safety relay cheap off eBay) I'm not sure where the best place to look for all the other bits is. I guess I'm going to want a fair selection of terminal strip connectors and that kind of thing. Googling sometimes turns up too many results - does anyone have a suggested supplier for these kinds of bits?
16-05-2014, 12:07 PM
RS components have lots of choice but can be a bit expensive at times. Your local electrical wholesaler should be able to supply most of the bits you need.
16-05-2014, 12:21 PM
RS and Farnell would be my first points of call but when I looked, the choice was intimidating! Specially when I'm not quite sure what I'm looking at... I shall have a plough back through build logs and see what other people have done.
16-05-2014, 01:30 PM
Chalon components here. Home - Chalon Components (http://www.chaloncomponents.co.uk/) they also sell on ebay but not sure if it works out cheaper or not. I get my switches, fuses, relays and 24V psu's here as well.
19-05-2014, 06:58 AM
Products - Electric Center (http://www.electric-center.co.uk/products/) They have got all you need for building control boxes. My local branch in Nottingham gives me good discounts, but then again they think I am a retired sparkie :highly_amused:
19-05-2014, 10:14 AM
Thanks - and a branch nearby in Plymouth as well! Useful to have somewhere close when you've just run out of something.
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.