PDA

View Full Version : NEW MEMBER: Oh dear! Another clueless newbie!



bishbosh
10-06-2014, 02:54 PM
Afternoon all,

Just signed up as I am now the proud owner of a Triac FANUC ATC. That's the good news. The bad news is I am a bit (read "a lot") clueless on the CNC side of things but I am will to learn!

Hoping to make large (1/5 scale) RC models once I get to grips with the technology...

The machine is 3 phase so my first challenge is getting it up and running on a single phase supply. I shall post a thread in the electrickery section on that one.

Anyhow, better do some paid work I suppose,

TTFN

Charlie.

bishbosh
10-06-2014, 02:58 PM
Afternoon all,

Just joined up as I have recently become the proud owner of a Denford Triac fanuc ATC.

I am somewhat clueless on the CNC front but am willing to learn and hope to mine you clever lot for information and guidance :)

I hope to make 1/5 scale RC models once I get to grips with the technology...

The machine is 3 phase so my first challenge is getting it to run on a single phase supply. I shall put a post in the electrickery forum for help on that one.

Anyhow, best do some paid work I suppose...

Cheers,

Charlie