dynamis_dk
28-06-2014, 02:39 PM
Have these two ballscrew setups for sale. I listed a thread to try and get a price before listing but never got anything in way of estimates so decided to just chuck it up and pick a price based on goggling a few of the know parts and/or similar sizes parts. Here's a quick rundown of the parts, any item numbers that I can see and a quick photo. More then happy to take any other angles needed if it helps.
12656
Sale is for two setups, each made up of the below parts (basically what you see in the picture):
2x THK BF15 End block (with bearings)
Ballnut - Zero Backlash Double internal Ball (85mm long / 63mm flange, 6 mounting holes and threaded hole for grease nipple)
Following information is wrote on the body, afraid I don't have an exact part number or specs.
PIM9739
11231
785701-01
Ballscrew - 10mm pitch, 25mm. End to end = 410mm, total ballscrew movement 220mm. 12mm shaft to mount to stepper/servo etc.
Looking for £100.
Collection preferred based in Barnsley (S75 2BA)(if local might be able to meet half way etc), happy to arrange courier for them but its likely to be costly due to weight. Payment Cash if collected, Bank Transfer as a preferred option and Paypal as a last resort.
12656
Sale is for two setups, each made up of the below parts (basically what you see in the picture):
2x THK BF15 End block (with bearings)
Ballnut - Zero Backlash Double internal Ball (85mm long / 63mm flange, 6 mounting holes and threaded hole for grease nipple)
Following information is wrote on the body, afraid I don't have an exact part number or specs.
PIM9739
11231
785701-01
Ballscrew - 10mm pitch, 25mm. End to end = 410mm, total ballscrew movement 220mm. 12mm shaft to mount to stepper/servo etc.
Looking for £100.
Collection preferred based in Barnsley (S75 2BA)(if local might be able to meet half way etc), happy to arrange courier for them but its likely to be costly due to weight. Payment Cash if collected, Bank Transfer as a preferred option and Paypal as a last resort.