Various CNC Components, Steppers, Drivers, Hiwin linear guides, Gearboxes (SIBONI)

[andrewbond]

Hi All,

Selling a loads of cnc bits, most of them have been used lightly but in good working order!#

Make me an offer and grab yourself a bargain, it all must go!

3 off Nema 34 4nm 8 Wire steppers from motion control products (never used)
1271212713

5 off Nema 34 Stepper motors, 4nm from Zapp (3 Unused)
1270012701

6 off Kinco high voltage drivers from Zapp (2 Unused)
1270212703

9 off Hiwin HGW 15 Carriages(4 used 5 unused)
Also have 2 off pieces 300mm and 2 off pieces 1500mm of the corresponding HGR15 linear guide
127041270512710

4 off HGW 25 Carriages (all used)
Also have 2 off pieces 3500mm of the corresponding HGR 25 linear guide

12706

3 off Siboni 5:1 Nema 34 planetary gear boxes with 8nm Steppers
1270712708

4 off Allen Bradley IP Rated E-stop Switches (never used)
12709

6 Pieces of Module 1 15x15mm Gear Rack, Drilled & counterbored on 65mm Centers
12711

[i2i]

i'm interested in the steppers and drivers, can you pm me some prices

[Wejjmeister]

Also intetested in the 34 nemas, the carriages and the rails please? Both 25's and 15's. Could you send prices please? Thanks.

[george uk]

am interested as well, ? need price ideas please

[MOCNC]

Hi All,

Selling a loads of cnc bits, most of them have been used lightly but in good working order!#

Make me an offer and grab yourself a bargain, it all must go!

3 off Nema 34 4nm 8 Wire steppers from motion control products (never used)
1271212713

5 off Nema 34 Stepper motors, 4nm from Zapp (3 Unused)
1270012701

6 off Kinco high voltage drivers from Zapp (2 Unused)
1270212703

9 off Hiwin HGW 15 Carriages(4 used 5 unused)
Also have 2 off pieces 300mm and 2 off pieces 1500mm of the corresponding HGR15 linear guide
127041270512710

4 off HGW 25 Carriages (all used)
Also have 2 off pieces 3500mm of the corresponding HGR 25 linear guide

12706

3 off Siboni 5:1 Nema 34 planetary gear boxes with 8nm Steppers
1270712708

4 off Allen Bradley IP Rated E-stop Switches (never used)
12709

6 Pieces of Module 1 15x15mm Gear Rack, Drilled & counterbored on 65mm Centers
12711


Hi can you also e mail me a price list please.

thanks
mo

[andrewbond]

Hi everyone,

Thanks for the interest but afraid someone has taken the lot off me last night,

Again thanks for the interest!

Regards
Andrew

[irving2008]

Jazz or JohnS ;)