Skydeals
09-07-2014, 01:03 AM
Hi, I need some final advice on wire choice for my CNC electronics. Ive had great advice on previous post.
Firstly, the power supply Im using is a PS408-12 type (http://www.leadshine.com/productdetail.aspx?type=products&category=power-supplies&producttype=linear&series=PS&model=PS408-12)
What would be the recommended fuse to use on the power plug, and is this based on the power supply output which is 36V/8A?
Secondly, for my connection between PSU and driver, i want to buy this wire of ebay due to cost.(http://www.ebay.co.uk/itm/FLAT-TWIN-AUTO-CABLE-2-CORE-THINWALL-CAR-VAN-MARINE-CAMPERVAN-WIRE-UPTO-50M-/251433953875?pt=UK_BOI_Electrical_Components_Suppl ies_ET&var=&hash=item3a8aa1aa53).
Is this OK to buy the 11A wire, considering the current and voltage output from PSU being 36V/8A?
Thirdly, what wire can i use between BOB and driver for signal, Im not considering CAT 5 cable just yet and only want minimal for playing with my CNC electronics at moment. Any recommendation of ebay? :eagerness:
Thanks in advance
Firstly, the power supply Im using is a PS408-12 type (http://www.leadshine.com/productdetail.aspx?type=products&category=power-supplies&producttype=linear&series=PS&model=PS408-12)
What would be the recommended fuse to use on the power plug, and is this based on the power supply output which is 36V/8A?
Secondly, for my connection between PSU and driver, i want to buy this wire of ebay due to cost.(http://www.ebay.co.uk/itm/FLAT-TWIN-AUTO-CABLE-2-CORE-THINWALL-CAR-VAN-MARINE-CAMPERVAN-WIRE-UPTO-50M-/251433953875?pt=UK_BOI_Electrical_Components_Suppl ies_ET&var=&hash=item3a8aa1aa53).
Is this OK to buy the 11A wire, considering the current and voltage output from PSU being 36V/8A?
Thirdly, what wire can i use between BOB and driver for signal, Im not considering CAT 5 cable just yet and only want minimal for playing with my CNC electronics at moment. Any recommendation of ebay? :eagerness:
Thanks in advance