View Full Version : NEW MEMBER: OneCNC Tech Support

15-05-2009, 10:10 AM
Hi all
Theres a CAD/CAM Package thats becoming popular in the uk called OneCNC
I'am the technical Director of if you have any technical questions about it or want to know how to do things with it let me know
I'am a miller who has spent many years on the machines
lots of experence in 2D upto 5 Axis in manufacture
Delcam/Solidworks/etc modelling experence
lots of videos on the utube i have done
also visit www.onecncblog.com look at UK tips on the link
so if i can help just shout up
best regards

John S
15-05-2009, 12:13 PM
Hey Peter :wave: How much and is there a trial version?

(The onecncxr3 brochure has to be the worst pdf document I've ever seen btw)

I very much doubt you will get an answer to the first two questions.

John S.

15-05-2009, 12:47 PM
I Will answer the 2 question's
First I'am not here to sell software, that you can do by contacting the sales teams,
trial version ask them
I dont care what pdf they have or use,thats down to them
I'am here to help those that have it,or give pointers in manufacture if i can
remember my saying give 10 millers the same drawing same material i bet 6 of them
will do it different and most important they won't be wrong its just the way they understand
thanks for the warm welcome

15-05-2009, 02:46 PM
Thankyou for your response

Lee Roberts
15-05-2009, 02:55 PM
Hi Gilly, welcome to the site!

I would like to thank you for coming here to represent Onecnc, itís great that you will be offering the community help and advice on the software as you can.

15-05-2009, 03:30 PM
Thanks for the Welcome lee
look forward to helping anybody that needs it
and contributing to MYCNCUK
best regards

15-05-2009, 06:05 PM
well we have over 800 user's here in the uk
its if they know about mycncuk,
then I'am sure they will look
best regards