PDA

View Full Version : Chines CnC ebay



amxen
06-08-2014, 07:59 PM
OK iv seen a 6040 chines cnc on ebay and in the add it said product shiped from the uk so not import tax/ duty to pay. Any one know if this is true ? or is it just to get you to buy then you get hit when it turns up?

thanks

amxen
06-08-2014, 08:01 PM
this add http://www.ebay.co.uk/itm/CNC-6040-ROUTER-ENGRAVER-MILLING-DRILLING-EQUIPMENT-k4-/190566922244?pt=UK_BOI_Metalworking_Milling_Weldin g_Metalworking_Supplies_ET&hash=item2c5eac7804

Gregor
06-08-2014, 09:07 PM
Hi amixe
I bought a 3040 and it came from Portsmouth and took two days for delivery

amxen
06-08-2014, 09:24 PM
so no import duty to pay? from the same seller ? thanks for the fast reply

Gregor
06-08-2014, 09:55 PM
no import duty it was from a different seller

jimbo_cnc
11-08-2014, 02:24 AM
Hey amxen, Did you buy it yet? I'm thinking of buying the same thing.

amxen
26-08-2014, 11:27 PM
Yes mate iv got it . having some problems with it but think i have worked them out

martin54
27-08-2014, 01:24 AM
this seems to happen quite a bit with all sorts of stuff on auction sites, stuff is being sent by one family member in China to one here in the UK. few different ways they can get round the import duty. Only thing is don't expect the support to be any better jf you have problems just because it was shipped from UK.

CommanderKenyon
31-01-2015, 11:25 AM
I've just got a 6040 and having problems with x axis managed to get things moving in Mach 3 rest of axis are fine but x moves in random directions and sometimes don't move just make humming noise with no motor movement atall

Clive S
31-01-2015, 05:21 PM
I've just got a 6040 and having problems with x axis managed to get things moving in Mach 3 rest of axis are fine but x moves in random directions and sometimes don't move just make humming noise with no motor movement atallWelcome to the forum. You might be better to start your own new thread and try and give a bit more info with pics. ..Clive

Musht
31-01-2015, 06:19 PM
I've just got a 6040 and having problems with x axis managed to get things moving in Mach 3 rest of axis are fine but x moves in random directions and sometimes don't move just make humming noise with no motor movement atall

Guess, Wiring from control to motor fracturing, its amazingly brittle, or the TB driver giving up.

Swap X&Y axis plugs over and see which axis gets the problem?

JAZZCNC
01-02-2015, 03:46 PM
I've just got a 6040 and having problems with x axis managed to get things moving in Mach 3 rest of axis are fine but x moves in random directions and sometimes don't move just make humming noise with no motor movement atall

It will be a loose connection to the Direction pin on the board or plug it's a common thing. That or the wire as break in it like MushT suggests as the wires are poor quality.