PDA

View Full Version : RFQ: RFQ: Gantry in Aluminium plate



IanS1
29-09-2014, 01:14 PM
Looking to get some parts made for my gantry. The drawings aren't complete yet but they will give an idea of what I'm after. The overall width is about 1200mm.

IanS1
03-10-2014, 03:51 PM
Had a few offers for making the smaller parts but it's the gantry top, bottom and face I'm struggling with, at 1200mm wide it probably needs someone with a router capable of cutting aluminium. Any takers?