PDA

View Full Version : RFQ: RFQ: Aluminium parts for my CNC router



biketrialsdave
12-10-2014, 11:06 PM
Hello all,

After spending a long long time designing my CNC router, I feel I am now at the time to start getting some quotes for the aluminium parts I require. The design is not 100% finalised but I only anticipate very small changes here and there.

See full build thread here: http://www.mycncuk.com/threads/5549-CNC-Router-V1-0-%28For-Cutting-Multiple-Materials%29

Essentially all parts require machining on top and bottom. I will update this thread ASAP with screenshots of each part to give a better idea. I can also, of course, provide STEP files for each part.

I am looking for an "all in" cost including material.

http://www.mycncuk.com/attachment.php?attachmentid=13596&stc=1

Part 1 - Gantry Side Plate (Left)
Quantity: 1
Material: Aluminium
Thickness: 20mm
Outside Dimensions: 255mm x 160mm

Part 2 - Gantry Side Plate (Right)
Quantity: 1
Material: Aluminium
Thickness: 20mm
Outside Dimensions: 255mm x 160mm

Part 3 - Y Axis Bearing Mount Plates
Quantity: 2
Material: Aluminium
Thickness: 15mm
Outside Dimensions: 160mm x 60mm

Part 4 - X Axis Carriage Plate
Quantity: 1
Material: Aluminium
Thickness: 20mm
Outside Dimensions: 231mm x 130mm

Part 5 - X Axis Bearing Plate (Top)
Quantity: 1
Material: Aluminium
Thickness: 20mm
Outside Dimensions: 130mm x 100mm

Part 6 - X Axis Bearing Plate (Bottom)
Quantity: 1
Material: Aluminium
Thickness: 20mm
Outside Dimensions: 130mm x 55mm

Part 7 - Y Axis Ballnut Mount
Quantity: 1
Material: Aluminium
Thickness: 20mm
Outside Dimensions: 97.5mm x 40mm

Part 8 - NEMA Motor Mount
Quantity: 3
Material: Aluminium
Thickness: 10mm
Outside Dimensions: 95mm x 70mm

Part 9 - Motor Mount Extrusion Bracket
Quantity: 3
Material: Aluminium
Thickness: 15mm
Outside Dimensions: 40mm x 70mm

Part 10 - Spindle Z Mount
Quantity: 1
Material: Aluminium
Thickness: 20mm
Outside Dimensions: 115mm x 130mm

Any questions, please don't hesitate to ask!

Thanks,

Dave