PDA

View Full Version : WANTED: Wanted Powermill to mach3 post



lukecnc2012
27-10-2014, 07:54 AM
Hi all looking for a post for powermill to mach3.any advice or help much appreciated

EddyCurrent
27-10-2014, 10:02 AM
This any use ?

http://www.cnczone.com/forums/powermill/78461-powermill-post-processors.html

lukecnc2012
29-10-2014, 07:43 PM
thank you for the link great help,just hope one of them works,will update if it works ok.


This any use ?

http://www.cnczone.com/forums/powermill/78461-powermill-post-processors.html

lukecnc2012
29-10-2014, 07:51 PM
Think you have to be a member for a certain period so can't seem to get it.any other post that work much appreciated

lukecnc2012
08-12-2014, 08:12 PM
Hi all tried the fanuc 1c post and don't seem to work on most strategies unfortunately.anyone got any that work or advice would be much appreciated

gianluca_g
01-04-2015, 10:55 AM
what version of powermill are you using? there is a number of post that works well with mach3 among the standard post that comes with powermill

lukecnc2012
02-04-2015, 04:29 PM
Hi thank you for the rely I was using 2012/2014 version at work but never found a post so Brough bobcad for the hobby machine would be good to have a good PM post for people using it

gianluca_g
02-04-2015, 04:53 PM
on powermill 2014 and 2015 i use the MAHO post that comes with powermill and it works good for me

paul_m
08-07-2015, 12:03 PM
i have a denford whaich i had converted to Mach 3, an excellent conversion using top quality kit.
wasnt cheap though.

Paul