PDA

View Full Version : Wanted - Cnc router



vfmcampers
27-10-2014, 09:44 PM
Hi all , after being almost scammed on an ebay purchase I'm looking for a used Cnc router

Ideally a vertical one , but flat bed is ok

Ideally looking for a full setup

Need a cutting size of 8 x 4 ft approx

To be cutting 25mm Mdf Max

Not looking for a very expensive setup - startup business here [emoji2]

Many thanks

BilboBaggins
28-10-2014, 11:27 AM
eBay item: 151451017601 ? Any good for you? :)

vfmcampers
28-10-2014, 11:36 AM
Private message sent

vfmcampers
28-10-2014, 11:39 PM
Bump [emoji2]

njhussey
29-10-2014, 01:08 PM
What's not very expensive? If you give a budget then it might elicit more responses. Saying that most people on here (at least it seems that way to me anyway) are DIYers and will have built their own. Does it have to be a full sheet, can't it be a half sheet. Reason I'm sayng that is that it cuts the cost down enormously and brings it more into the realms of the average DIYer....I take it you're not looking to build one yourself, which would be the cheapest route?

EddyCurrent
29-10-2014, 01:21 PM
Generally I also consider the resale value such that; actual cost = purchase price - sale price. Obviously the longer you keep it the longer the 'out of pocket' period.

vfmcampers
29-10-2014, 03:05 PM
Thanks guys, I didn't realise that it was mostly a diy build forum ,

I need a machine capable of cutting a 2400 x 1200 sheet, I know I could save money on a smaller machine but I don't want to , I have a budget of 6k B2B ie Inc VAT or 5 k from a private source ... Which I consider realistic given my recent conversations with China manufacturers ... It is my preference to have one now though ... Not to wait ...

Hope that helps

irving2008
29-10-2014, 11:33 PM
A lot of our members run commercial CNC operations but they still diy their machines because they get exactly what they want and value for money. Building it yourself means you know it intimately and therefore not reliant on dubious 3rd party support.

emelge1111
06-11-2014, 07:22 PM
Hi ,
We have a geiss 840d cnc router-trimmer for sale , cutting area 2500mmx1250mmx500mm in the 'z' axis, machine is full 5 axis or 2.5d.Very ,very expensive machine and was working perfect when removed from large aerospace company.Comes complete with 2 chillers.Machine is within your budget. Please inbox for details if of interest.

r0bsk1
06-11-2014, 10:59 PM
Im selling mine. Its 1200x1200 but open at both ends. Plus it's upright too.

http://www.mycncuk.com/threads/7892-Selling-due-to-moving-to-Oz

All depends if you want a finished item or a project to finish off.