thewelshvicar
01-11-2014, 12:37 PM
Hi all,
I am looking at buying a cnc router for some projects I have.
I was thinking about a3 bed size and was hopeing for some adivice on machines and software.
my projects would be mostley wood cutting and engraving, but would be looking at 3d at a later date.
I have just built a small A4 cnc mill with mach3 controller which I have some engraving work for in brass.
I have managed to roughly setup the machine with mach3, but I was hoping someone may be able to some me the basics of using aspire
any help or advice would be appreciated
I am looking at buying a cnc router for some projects I have.
I was thinking about a3 bed size and was hopeing for some adivice on machines and software.
my projects would be mostley wood cutting and engraving, but would be looking at 3d at a later date.
I have just built a small A4 cnc mill with mach3 controller which I have some engraving work for in brass.
I have managed to roughly setup the machine with mach3, but I was hoping someone may be able to some me the basics of using aspire
any help or advice would be appreciated