PDA

View Full Version : WANTED: Wanted: Boxford 160 TCL CNC Turning Machine Tool Installation & User Manual



Saracen
04-11-2014, 07:15 PM
"Boxford 160 TCL CNC Turning Machine Tool Installation & User Manual" wanted.

I have the programming guide but would like a copy of the user guide too.

Adrian.

EddyCurrent
04-11-2014, 08:09 PM
You probably know this site but in case not;

http://store.lathes.co.uk/prints/b?page=3

scroll down to Boxford

Saracen
04-11-2014, 11:29 PM
I did find that site but, having paid 12 for the programming manual, it rankles somewhat to be asked to pay more than five times that for the user manual.

Adrian.

Saracen
06-11-2014, 05:46 PM
I've found another site advertising manuals:

http://www.machinemanuals.co.uk

11.95 for the 160 TCL Operating Manual.

Will have to wait and see whether it's an original, or a scanned copy.

Adrian.

Saracen
08-11-2014, 12:52 PM
Manual has turned up and it is a photocopy, but it does seem to have all the mechanical fault finding steps and circuit diagrams for which I was looking.

Adrian.