PDA

View Full Version : WANTED: milling table



deisel
13-11-2014, 09:22 PM
does anyone know where I could get a milling table 700mm x 210mm no less.
amadeal have one that size but sell it with the base and arc euro do them that length but are too narrow,
id consider used if anyone has one.thanks

bikepete
14-11-2014, 11:40 AM
does anyone know where I could get a milling table 700mm x 210mm no less.
amadeal have one that size but sell it with the base and arc euro do them that length but are too narrow,
id consider used if anyone has one.thanks

Let us know if you find a source - I'm on the lookout too for one about that same size. Was thinking of asking the various suppliers if they could do one as a 'spare part' - e.g this machine from Chester (http://www.chesterhobbystore.com/eagle-30-mill--drill-3995-p.asp)has a table about the right size. But not sure how willing they'll be to go to the trouble of sourcing one if not actually for a machine bought from themselves. Though presumably all they'd have to do is add it to their list for the next shipment...

deisel
14-11-2014, 02:18 PM
what mill have you got pete? im modding an sx3 bought from arc and wondering wether they would oblige.
i remembered sieg do an sx4 mill ,table size is 820mm x 240mm though.

bikepete
14-11-2014, 02:26 PM
what mill have you got pete? im modding an sx3 bought from arc and wondering wether they would oblige.
i remembered sieg do an sx4 mill ,table size is 820mm x 240mm though.

Making my own from scratch :-). Will update the build log (http://www.mycncuk.com/threads/1074-Add-on-CNC-build-log?p=42156#post42156) soonish I hope...

Jonathan
17-11-2014, 11:33 AM
I'd set up a favourite search on eBay - something like this (http://www.ebay.co.uk/sch/Business-Office-Industrial-/12576/i.html?_from=R40%7CR40%7CR40%7CR40%7CR40%7CR40&_mPrRngCbx=1&_udlo&_udhi=250&_nkw=milling%20table%20-rotary%20-vacuum%20-router%20-nut%20-dividing&rt=nc&_pppn=r1).

deisel
17-11-2014, 07:50 PM
will do,i did message sieg but they forward you to resellers and wont deal direct,one will turn up ;)

Pilgrim
20-11-2014, 09:53 PM
does anyone know where I could get a milling table 700mm x 210mm no less.
amadeal have one that size but sell it with the base and arc euro do them that length but are too narrow,
id consider used if anyone has one.thanks

I don't know it it will of any use to you, but I have a used compound table from a Sealey Mill. You seem to be further down the build route than I am and I don't think I will really have time. It is currently sitting on a small pallet to move it around. Unless you live in the north east it would have to be picked up by a carrier. Contact me if of interest.