View Full Version : DIY machine porn
22-05-2009, 10:53 PM
If, for some reason, you want to feel inadequate: Have a look at this guy's work
23-05-2009, 01:13 PM
Bill, I felt inadequate when I followed you renovating that lathe, this is just sick :)
Just posted on the Yahoo Mach group
YouTube - Portable CNC milling machine
Answer looking for a problem?
23-05-2009, 10:49 PM
You having a bash Bill?
I have plans:
An MD30 drill/mill to conversion, which has been on hold while I fixed up the lathe. I have made a couple of DC servo boards (Max-Mod's pic dsp based design) for it and have yet to design the Z axis mechanism (which might be a planetary traction drive to the rack and pinion). Oh yes and I've yet to fix the broken servo motor encoder - I bought a bargain encoder wheel, only to find my two channel reader unit wont read the three channel encoder :redface:
And, a bed-top cnc adapter for the HLV, (similar to this Feeler conversion). I bought an extra width Hiwin slide from the US the other day with the intention of using it as the cross-slide with a single, but when I tested the idea (by clamping it the Hardinge's carriage) there was a little too much play in the Hiwin truck to be useable (a new set of bearing ball might fix it).
23-05-2009, 11:45 PM
Looks like a job more suited to crossed roller bearings
Yes they would do it. However, the 'problem' forces, in-feed and reaction, are small (the majority of the force is straight down). I was easily able to hand feed the tool to face a part, even holding the tool to turn down the piece wasn't too hard. Accuracy is only effected if the carriage/truck flexes away from the part (because the feed screw will be some distance away from the tool). The problem with my Hiwin MGW slide is that is has a small amount of clearance (it's not a pre-loaded type).
Any images of the traction drive?
I haven't even designed it yet!
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.