(Now found) 2 Inductive sensors

[Jonathan]

I'm after two inductive sensors for my milling machine. They need to be the cylindrical type, so something similar to this:

http://www.mycncuk.com/attachment.php?attachmentid=13880&stc=1

I don't mind if it's NPN/PNP or what voltage, size, colour ... anything that shape basically!

If someone would like to do a swap then I've got plenty of these.

http://www.mycncuk.com/attachment.php?attachmentid=13881&stc=1

Thank you...

[johnsattuk]

Are these 4mm Dia or 4mm sensing distance

John

[Jonathan]

Are these 4mm Dia or 4mm sensing distance

John

The latter I think, but either is fine for me as I'm yet to make the part which they'll mount upon.

[johnsattuk]

Hi Jonathan

Don't have exactly what you want, sent 6 to Australia a few months ago

Have a variety 4mm dia plain, M5 threaded, M12 threaded, M18 threaded.

The M12s are used but OK and still have a good length of lead on them.

I can send any/all of them for you to play with if you like

regards

John
http://www.mycncuk.com/attachment.php?attachmentid=13882&stc=1http://www.mycncuk.com/attachment.php?attachmentid=13883&stc=1http://www.mycncuk.com/attachment.php?attachmentid=13884&stc=1

[cropwell]

I have got 5 LJ12A3-4-Z/BX (4mm/NO/NPN) which you can have on a replace basis (you can order them from China) I am in Cropwell Bishop Nottinghamshire, so easy(ish) for you to collect if in a hurry. PM me if interested.
Rob

[johnsattuk]

Have some reed switches that I have used in the past, sometimes fit into small spaces more conveniently.


John

http://www.mycncuk.com/attachment.php?attachmentid=13888&stc=1http://www.mycncuk.com/attachment.php?attachmentid=13887&stc=1