View Full Version : NEW MEMBER: First timer

30-11-2014, 08:23 AM
Hi all,

Im starting up a CNC project from scratch with a bunch of old used parts I got. I have some help back home but I think this place looks like a good place to share knowledge as well.

My goals is to learn basic CNC and machining. The project goal is to finish a working CNC, not too big that are able to mill in to aluminum blocks. I dont have very much of spare time but some evenings every week is planned in to this.

Other related hobbies:
Flying RC stuff, mostly multirotors and FPV.
EV, electrical bikes.


30-11-2014, 11:39 AM
What size linear rails will you be using ? and what size is the table in your drawing ?

30-11-2014, 08:04 PM
Hi Eddy, Im thinking of a 440mm x 440mm table, something. I attach a sketch for you if you want to look.13949

30-11-2014, 09:48 PM
can't open .easm files

01-12-2014, 08:23 PM
can't open .easm files
You are able to download a free viewer that are able to measure take apart and split scetches here http://www.edrawingsviewer.com/ed/download.htm There is also a eDrawings app to download.