PDA

View Full Version : WANTED: Wanted CNC Router



kay
24-01-2015, 06:21 PM
Hi People.
I am looking for a Cnc Router complete set up, or with an option installation of software on my own pc>
nothing too small absolute novice who wants to learn as i create.
i am based in manchester but will travel

be happy.

kay :]

Clive S
24-01-2015, 07:57 PM
Hi People.
I am looking for a Cnc Router complete set up, or with an option installation of software on my own pc>
nothing too small absolute novice who wants to learn as i create.
i am based in manchester but will travel

be happy.

kay :]Welcome to the forum. It might help if you say what you would like to cut with it and hobby use or commercial !! ..Clive

kay
24-01-2015, 08:22 PM
Hi Clive

Thanks for the reply and advice. I just want to engrave into wood, with text and images {peoples faces} just as a hobby, but i do not want to have any cheap chinese rubbish i here so much about, if the members could give me any advice on good reliable makes manufacturers that would be fab.

kay :]


Welcome to the forum. It might help if you say what you would like to cut with it and hobby use or commercial !! ..Clive

EddyCurrent
24-01-2015, 09:42 PM
These are uk makers that might supply your needs;
http://stoneycnc.co.uk/
http://www.exelcnc.com/

Boyan Silyavski
25-01-2015, 01:50 PM
These are uk makers that might supply your needs;
http://stoneycnc.co.uk/
http://www.exelcnc.com/

I would rather find somebody here at the forum to make me a machine if i was you. The machines Eddy says are entry level, and IMO - not worth the money they want for them. For the same money you will have a better and exactly to you needs machine.

I believe Dean /JAZZCNC/ and other people here make machines by order. Post in the relevant section - JOB requests.

paul_m
08-07-2015, 01:05 PM
Im possibly looking to sell my denford microrouter compact, fully converted to mach3.

pm for details

adrpak
30-10-2015, 11:44 AM
http://images.tapatalk-cdn.com/15/10/30/07d0a5b5494d38c78bcb35cdb665e924.jpghttp://images.tapatalk-cdn.com/15/10/30/0f40b902e62dc03b7b02bad7825120da.jpg

Wysłane z mojego MI 4LTE przy użyciu Tapatalka

adrpak
30-10-2015, 11:52 AM
http://images.tapatalk-cdn.com/15/10/30/07d0a5b5494d38c78bcb35cdb665e924.jpghttp://images.tapatalk-cdn.com/15/10/30/0f40b902e62dc03b7b02bad7825120da.jpg

Wysłane z mojego MI 4LTE przy użyciu Tapatalka
For sale. With spindle and inverter. No motors and electronic.


Wysłane z mojego MI 4LTE przy użyciu Tapatalka

johnsattuk
30-10-2015, 12:11 PM
Can you give cutting area

adrpak
30-10-2015, 12:18 PM
Apprix X 800 Y650 Z 200

Wysłane z mojego MI 4LTE przy użyciu Tapatalka