View Full Version : WANTED: part number
10-02-2015, 01:07 PM
has any one got any of these connectors, both male and female ends, or part numbers
10-02-2015, 05:47 PM
is this what you are looking for ?
10-02-2015, 07:45 PM
The one cropwell pointed to looks that part allright, I don't know if this one is the right size; http://www.rocketradio.co.uk/4-pin-microphone-plug-1138-p.asp
10-02-2015, 08:27 PM
yes thats the one Cropwell, Thanks
been looking for weeks.
the rocket radio one is the part people keep sending me saying its right
10-02-2015, 09:10 PM
The 4 pin locking socket will fit on a spindle, but the keyways will not engage, so you could put it on the spindle any way you like (that gives you 3 wrong ways) I have a 2.2kw spindle which I tried it on. Anyway the locking ring wouldn't screw on. I would be wary about using the Rocket offering, which are basically audio connectors and only rated up to 60 volts. They seem to be popular for stepper motor connectors though.
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.