PDA

View Full Version : WANTED: part number



tinshak
10-02-2015, 02:07 PM
hi
has any one got any of these connectors, both male and female ends, or part numbers
http://www.mycncuk.com/attachment.php?attachmentid=14644&stc=1

tinshak.

cropwell
10-02-2015, 06:47 PM
http://www.aliexpress.com/item/Free-shipping-ChangSheng-spindle-motor-plug-ChangSheng-spindle-motor-connector-for-0-8kw-1-5kw-and/32235681730.html

is this what you are looking for ?

EddyCurrent
10-02-2015, 08:45 PM
The one cropwell pointed to looks that part allright, I don't know if this one is the right size; http://www.rocketradio.co.uk/4-pin-microphone-plug-1138-p.asp

tinshak
10-02-2015, 09:27 PM
yes thats the one Cropwell, Thanks
been looking for weeks.
the rocket radio one is the part people keep sending me saying its right

cropwell
10-02-2015, 10:10 PM
The 4 pin locking socket will fit on a spindle, but the keyways will not engage, so you could put it on the spindle any way you like (that gives you 3 wrong ways) I have a 2.2kw spindle which I tried it on. Anyway the locking ring wouldn't screw on. I would be wary about using the Rocket offering, which are basically audio connectors and only rated up to 60 volts. They seem to be popular for stepper motor connectors though.
.
Cheers, Rob