View Full Version : What feed and speed for Oak
13-02-2015, 08:41 AM
I am wanting to do a profile cut in Oak using a 6mm 2f HS cutter full slot. I would like an idea of the speed & feed, DOC, rpm etc. The Oak is 20mm thick. It will be cutting long grain and end grain.
13-02-2015, 10:32 AM
i find that oak splits easily if you use upcut, make sure you on a down cut (climb or conventional milling)
feeds , i take it easy to avoid splinters
3mm DOC, 3000mm feed , 12k rpm
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.