PDA

View Full Version : Ballscrew machining details



HiltonSteve
02-06-2009, 10:24 AM
Just came across this and thought it may be of use to people looking at machining their own ballscrews, it shows the 'standard' threads and bearing dia's. -

http://www.mycncuk.com/forums/photoplog/images/680/medium/1_machining_1100mm_small.jpg

HiltonSteve
02-06-2009, 10:43 AM
Not nicked it, just borrowed it.....

I will put it back when everyone has finished looking at it.:naughty:

Gary
02-06-2009, 07:08 PM
Oi thats mine, thief, call the police.

These ones are better.

HiltonSteve
02-06-2009, 07:29 PM
OK, its a fair cop...!!!!

Best have a look at the better drawings before they take me away.:sad:

Lee Roberts
03-06-2009, 09:32 PM
These ones are better.

Oi you motherFunkie !

m100
24-07-2009, 12:39 AM
anyone have something similar for 12mm ballscrews?

HiltonSteve
24-07-2009, 12:49 AM
No but I do have some 12mm ballsrews that I could measure for you...

Not tonight though as after too many pints the tolerances get wider...

ptjw7uk
24-07-2009, 07:30 AM
Hi
Marchant dice have some dimensions at http://www.worldofcnc.com/images/Machining.pdf
although it appears that things have moved on the thread front in that the one I got from them had an m8 x 0.75 thread.
A finer than the m8x1.0 on the list which meant more expense buying a tap and die which I had to buy as the other ball screws did not have the ends machined.

Peter

Gary
24-07-2009, 08:11 AM
Here you go.
http://www.slidesandballscrews.com/pdf/Ballscrews/Pages 63-64.pdf



anyone have something similar for 12mm ballscrews?

m100
24-07-2009, 04:01 PM
Thanks, much appreciated!