PDA

View Full Version : NEW MEMBER: Hello from Essex UK



Kn8
03-06-2009, 06:12 PM
Hello everyone, I have joined this group because I am very interested in converting a bench top Milling machine to CNC. I am still undecided as to which machine to purchase. I would like one with a dovetail column for positive head location when moving the Z axis. Any advice will be gratefully received.
I have a very small amount of experience in this area having acquired a CNC controlled engraving table with a non functioning control system a while back, I muddled my way through getting interfaced to a PC and working with Mach3.

All the Best
Ivan.
:smile:

BillTodd
03-06-2009, 09:17 PM
Hi Ivan What part of Essex?

(Us Colchestrians are a little snooty about being called Essex men, referring to it as North-East Essex or Essex/Suffolk boarder ;))

Kn8
04-06-2009, 06:22 AM
Hi Bill

Stanford Le Hope, Essex.

John S
04-06-2009, 09:16 AM
Not much hope for you then mate.........

.

BillTodd
04-06-2009, 11:35 AM
Not much hope for you then mate.........
Oh, I think I'm big enough to cast the hand of friendship south of Chelmsford ;)

Hi Ivan, don't let the 'northerners'* put you off; most of them are friendly, some even speak English.

* - Actually, there's a kiwi on the board somewhere, so I guess we're all northerners now :)

John S
04-06-2009, 12:01 PM
Stanford Le Hope ??

Not much hope ???


OK I'll get me coat.

.

Kn8
04-06-2009, 07:53 PM
Hello John & Bill thank you for the welcome.