Jazzcnc, the right choice in a custom made machine

[alex wight]

Due to lack of time to build my own machine (which i had started), i had to get it made for me.

I approached Dean (JAZZCNC), to make a machine for my needs.

We kept in touch throughout the build, and the final results were delivered to me last friday.

I am absolutely delighted with the machine, and look forward to putting it through its paces.

It was great to meet Dean and his friend Heath, where we had a good laugh getting it up and running.

I will put up photos of the machine, and also what its getting up to.

Once again, huge thank you to you Dean and Heath.

[alex wight]

http://www.mycncuk.com/attachment.php?attachmentid=15303&stc=1http://www.mycncuk.com/attachment.php?attachmentid=15304&stc=1http://www.mycncuk.com/attachment.php?attachmentid=15305&stc=1http://www.mycncuk.com/attachment.php?attachmentid=15306&stc=1http://www.mycncuk.com/attachment.php?attachmentid=15307&stc=1http://www.mycncuk.com/attachment.php?attachmentid=15308&stc=1http://www.mycncuk.com/attachment.php?attachmentid=15309&stc=1

[Boyan Silyavski]

No doubt you have made the right choice to have custom made machine and on top of that made by Dean. Good luck to you!

[RatherBeMaking]

Looks like a great machine. I'm hoping Dean can do something for me when he's got time :thumsup:

[Wal]

Looks like a top notch machine. Nice work, Dean!

Wal.

[JAZZCNC]

Well Alex must say your a sly bugger I didn't see you taking those pics and wasn't expecting this but hey least your praising not slagging. . .Lol

Thanks All for nice comments and those pics don't show just how heavy that bloody thing is.!!. . . Plenty of tea was required after humping that thing around. (Bacon butty's also went down nice as well thanks to Alex's lovely wife.!!) 6mm wall steel don't walk around the floor and now I think Alex fully realises why he went to the trouble of removing wooden floor and laying concrete slab.!!.

Looks like didn't take you long to get back into using a CNC machine Alex and look forward to seeing what comes off the end. Wish you well with your business and machine performs to expectations giving you that new dimension CNC allows.

Here's few pics I took that show it with control box on wall and with all it's covers on.

153101531115312

[GEOFFREY]

Alex, you are a jammy devil, getting Jazz to make that for you. Jazz, that looks a super job, but from you anything less would be a disapointment!!! G.

[T0rnado69]

that looks fab, and very heavy....

must of been a nightmare getting that in the van...

sure looks top notch........

great stuff........



lucky bs38945868rd :)

[alex wight]

Thank you very much guys, if you ever get the chance, and he is able to, get Dean to make your machine.

As i said before i would never have had the time nor the expertise to put, what i have in place now, together my self.

The machine weighs a ton, took 3 of us to lift one side lol, don't think heath was really trying tho lol.

Bacon buttes were made by yours truly as was 19 of the 20 cups of tea lol.

Saturday and sunday, my head was bursting, trying to put into practice what i had been studying in preparation for the machines arrival. But i have to say, that yesterday and today has been a pleasure.

Ive made the a few things, out of mdc, just to get used to the machine.

I,m glad to say that I'm on cloud 9, and after putting some of my work on my Facebook account, orders have started to fire in.

This is going to be the best working decision that i have ever made in my life.

Once again all made possible by the expertise of Dean.

watch this space.

alex

[JAZZCNC]

The machine weighs a ton, took 3 of us to lift one side lol, don't think heath was really trying tho lol.

Bacon buttes were made by yours truly as was 19 of the 20 cups of tea lol.

Nah think that was me mate but I did have half an excuse with only have one good wing, my collar bone was foooking killing me when got home.!!

Compliments to the chef on the Butties and tea.!

[PAULRO]

well done Jazz, super build. best of luck Alex.

[Noplace]

awesome! can you post any videos by any chance? love to see some of the machines here working in real time!

[devilskiss]

great build ! any idea what the total cost came to ? im looking at building a machine like that

[Robin Hewitt]

High Y rails to remove the flexi side plate inaccuracy, table adjusts up and down to remove the Z overhang, hard to fault it :beer:
Traditionally on a Jazz machine, one crucial component will be hand forged from lager beer bottle caps, have you found it yet?

[devilskiss]

Well Alex must say your a sly bugger I didn't see you taking those pics and wasn't expecting this but hey least your praising not slagging. . .Lol

Thanks All for nice comments and those pics don't show just how heavy that bloody thing is.!!. . . Plenty of tea was required after humping that thing around. (Bacon butty's also went down nice as well thanks to Alex's lovely wife.!!) 6mm wall steel don't walk around the floor and now I think Alex fully realises why he went to the trouble of removing wooden floor and laying concrete slab.!!.

Looks like didn't take you long to get back into using a CNC machine Alex and look forward to seeing what comes off the end. Wish you well with your business and machine performs to expectations giving you that new dimension CNC allows.

Here's few pics I took that show it with control box on wall and with all it's covers on.

153101531115312

Hi Dean , i know it was some time ago , but would you be interested in building me a similar machine ? and what would it cost in total ?

[Clive S]

Traditionally on a Jazz machine, one crucial component will be hand forged from lager beer bottle caps, have you found it yet?That was when he was learning TIG

[JoeHarris]

Very nice machine!

[alboy]

Very Nice. Looks a great machine, sorry the timing was wrong when I wanted a 'Jazz' machine but I am in the fortunate position to be wanting a second one soon, so expect a PM Jazz :-)

Would that be Alex of RV woodcraft by any chance????

Have fun