PDA

View Full Version : Metal Working Lathe



DanBlack
17-06-2015, 09:55 AM
Hello everybody, I live in the UK and I am looking to buy my first Lathe. I have a budget of about £2000 I would need the lathe to be able to produce fairly big work pieces (at least 50cm in length) and work with most metal materials. I am torn between buying an older second hand one which seem to be more rugged, or a newer Chinese based lathe. I'm interested to hear peoples experiences and what they would recommend as a good quality machine.

IanParkin
17-06-2015, 10:27 AM
Hi Dan

I have a colchester student which generally has a centre height of 6.5 inches and 24 inches between centres (they are labelled as 6" but most are master CH )
It weighs 675kg and has a largeish footprint
You could get one for £1000 ish with 2 chucks steadys etc
leaveing you with £500 to buy tooling and accesories
You will get all that and more back if you ever sell it
Parts are easily available and reasonably priced (unless new)
Pleasure to use it...If you have the room you wont regret it

DanBlack
17-06-2015, 10:37 AM
Thanks for replying is there a company that sells them? or am I looking for second hand one?

Neale
17-06-2015, 11:10 AM
Definitely second-hand, but there are various dealers around that often list them (try Google!) or they sometimes turn up from private sellers. You will probably need to budget for a three-phase inverter if it's from a dealer as it will have come from a commercial workshop. Not a bad way to go, though.

DanBlack
17-06-2015, 11:36 AM
That's a good idea I will keep a look out is there any makes you would highly recommend other than the Colchester?

IanParkin
17-06-2015, 12:27 PM
The british makes you should look out for on ebay perhaps are colchester harrison boxford ...myfords might be too small for you unless a 254 but they are expensive
what do you want to turn? size wise
Do you want a bench mounted machine or free standing
is your floor good
is noise an issue
whats your power availability
or post a link to a chinese lathe you have been looking at

DanBlack
17-06-2015, 12:41 PM
Thanks for some of the recommended makers. I was looking at something like this: http://www.dropros.com/DRO_PROS_Sieg_SC8_Lathe.htm

IanParkin
17-06-2015, 04:38 PM
well thats a similar spec to a colchester student and a similar footprint but just look at the weight difference 385 lbs rather than 1300 lbs
the spindle hole is only 1" a student is 1.5"
everything looks a little weedy on the seig

as an example this one
http://www.ebay.co.uk/itm/Colchester-Student-/181773643277?pt=LH_DefaultDomain_3&hash=item2a528dae0d

looks good but depends on what other bits there are to go with it
that one may go for £7-800 ish
A inverter for £200 ish will get you a very nice machine with 8 spindle speeds all with variable speed and full screwcutting and feed speeds...no messing around with loose gears and or belts
a quickchange toolpost transforms it too at £170
a good clean and a new coat of paint will make it gleam

DanBlack
18-06-2015, 09:18 AM
Thanks I will look into this I always enjoy revamping machinery, it helps me learn more about the machine.

mekanik
18-06-2015, 09:47 AM
This one seems a better bet it has all the toys
http://www.ebay.co.uk/itm/11-Harrison-Lathe-L5A/161734393953?_trksid=p2047675.c100009.m1982&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D30775%26meid%3Dd125a3ec47104245ab87f4a7e420 86c1%26pid%3D100009%26rk%3D1%26rkt%3D10%26mehot%3D pp%26sd%3D181773643277
Regards
Mike