dsc
19-06-2015, 12:59 AM
Hi,
I'm looking for someone with a laser machine to cut out very simple, but rather small (roughly 20mm x 10mm with a 3.5mm hole) rectangular shaped pieces of plastic. I'm talking PTFE mostly here, but I'd like to experiment with some typical flexible plastics as well, thickness range from 0.3 - 1mm. I can send on DXFs etc.
Cheers,
Tom
I'm looking for someone with a laser machine to cut out very simple, but rather small (roughly 20mm x 10mm with a 3.5mm hole) rectangular shaped pieces of plastic. I'm talking PTFE mostly here, but I'd like to experiment with some typical flexible plastics as well, thickness range from 0.3 - 1mm. I can send on DXFs etc.
Cheers,
Tom