PDA

View Full Version : Boxford VMC 300 Sirel Spindle Drive and motor



Joe
12-08-2015, 07:46 PM
I am looking for help finding some information about a Sirel DC motor driver

It is from a 1997 boxford VMC 300 which I am refitting with a modern electronics and control and want to use it in the new set up if possible.

The motor appears to be a Parker DC servo motor without an encoder but there is a encoder/tac on the spindle its self.

I was wondering if anyone has any experience with this motor or drive and has any information about it because I cant find anything! I contacted boxford but they said that it has been so long since they sold it they no longer have any information

thanks

Joe

http://www.mycncuk.com/attachment.php?attachmentid=15874&stc=1http://www.mycncuk.com/attachment.php?attachmentid=15875&stc=1http://www.mycncuk.com/attachment.php?attachmentid=15876&stc=1