View Full Version : RFQ: 3 motor mounts needed,

26-08-2015, 11:02 PM
anasonic minas a4 200w motors, 'I think 60mm bolt holes to squares
to an isel fb2

motors foot is 6-7mm

any suggestions ??

I am in London
I have some 15mm aluminium plate

would like them sexied up if possible on the lower plate, maybe cove bit what ever that's called and knock the edges off

oops, just ordered the motor couplings 11mm to 1/4 and could only get them 42mm long
so the lower plate needs to be 20mm - I have some of that too.

I can't slow my motor down enough - don't know what bit to use.
don't know depth per pass
don't know the grade of allominoominoom I have
can't sexy them up with cove and 45 knocks

take 3
just two 20mm plates now, found some smaller couplers
http://img.photobucket.com/albums/v222/pantswagen/motor%20mount_zps8gicxbph.jpg (http://smg.photobucket.com/user/pantswagen/media/motor%20mount_zps8gicxbph.jpg.html)

28-05-2017, 04:23 PM
ok so...
basically motor mounts to take a 200w Panasonic minas a4 motor onto a isel techno fb2
or a davinci

prices please